General description
The shock wave generator (Surge Tester) is a programmable automatic electronic device.
The device is particularly suitable for manual use or for use in an automatic system.
Main features
- Shock wave testing with programmable voltage from 200 to 5000 VDC
- Non-destructive testing for the product
- Partial discharge (corona) measurement with 100 MHz sampling
- Inductance testing up to approximately 10µH
- Pre-recording of typical curves on representative samples for comparison with tested products
- Test programme management
- In case of fault: audible and visual alarm
- Test recording
- Numerous interfaces: USB, RS232, digital inputs/outputs, etc.
- Can be controlled by computer
Technical specifications
| Power supply | 115 V or 230 V / 50/60 Hz + ground |
| Presentation | compact box (310x150x180mm) |
| Shock wave test
Test voltage Output power Maximum inductance Sampling |
200V à 5000VDC in steps of 100V 0,25J max Approximately 10µH 100MHz (10ns) – 8 bits |
| Operation
Ground reference Test launch mode Result recording |
Floating potential Cycle start button With |
Detailed technical data sheet in English :
Items supplied with the device :
- User manual
- Verification report with COFRAC connection certification
Available accessories :
- Test cages
- DLL library and control software for PC
- …
.