SCHLEICH High Voltage station ≤ 6KV ≤ 4mA type GLP1 and GLP2

GLP1 and GLP2 type stations are electronically designed, programmable automatic high-voltage generators.

The devices are particularly suitable for manual use with clamps or test guns or for use in an automatic system.

High Voltage Test at 5.5kVAC max and 6kVDC
Leakage Current up to 3mA AC and 10mA DC
Insulation Test with max voltage 6kVDC and max resistance 10GΩ
Digital display of measurements on control panel
Programming and messaging display on control panel with keypad
All programmable parameters (voltage, duration, minimum threshold, maximum threshold, ramp-up/ramp-down, etc.)
In case of fault: circuit breaker trip, audible and visual alarm
Test recording
Numerous interfaces: USB, RS232, Ethernet, digital inputs/outputs, etc..
PC control possible

Power Supply	230 V / 50 Hz + ground
Presentation	standard 14″ box (also available in 19″ case BB1880B or table case BB1800B)
High-voltage AC/DC test Voltage adjustment and measurement Leakage current measurement Trip-out threshold Test duration Burning function Insulation test Voltage adjustment and measurement Insulation resistance measurement Fault threshold Test duration	Adjustable up to 5.5KVAC and 6KVDC Digital Display Digital Display : 0 to 3mAAC and 0 to 10mADC Programmable minimum and maximum thresholds Programmable Without Adjustable up to 6KVDC Digital Display Digital Display : 250kΩ to 10GΩ Programmable Programmable
Operation Ground reference Test launch mode Recording results	Floating potential Cycle start button or hold button on remote control input depending on settings With

Items supplied with the unit :

Available accessories :