SCHLEICH GLP1 and GLP2 Automatic and Programmable Isolation Station

GLP1 and GLP2 type stations are electronically designed, programmable automatic insulation resistance measurement stations.

The devices are particularly suitable for manual use with clamps or test guns or for use in an automatic system.

Four-wires method measurement
High Voltage Test from 100V to 3000VDC
Leakage current up to 4mA DC
Insulation test with voltage from 100V to 3000VDC
Resistance measurement from 500kΩ to 1.5GΩ
Digital display of measurements on a touchscreen panel
Programming and messaging display on the touchscreen panel
All programmable parameters (voltage, duration, minimum threshold, maximum threshold, ramp-up/ramp-down, etc.)
In case of fault: circuit breaker trip, audible and visual alarm
Test recording
Numerous interfaces: USB, RS232, Ethernet, digital inputs/outputs, etc..
PC control possible

Power Supply	230 V / 50 Hz + ground
Presentation	standard 14″ case
High-voltage AC/DC test Voltage adjustment and measurement Leakage current measurement Trip-out threshold Test duration Burning function Insulation test Voltage adjustment and measurement Insulation resistance measurement Fault threshold Test duration	Adjustable from 100VDC to 3000VDC Digital Display Digital Display : 0 to 4mADC Programmable minimum and maximum thresholds Programmable Without Adjustable from 100VDC to 3000VDC Digital Display Digital Display : 250kΩ to 1.5GΩ Programmable Programmable
Operation Ground reference Test launch mode Recording results	Floating potential Cycle start button or hold button on remote control input depending on settings Results recorded

Items supplied with the unit :

Available accessories :