General Description
The A1410IS is a programmable, automatic insulation resistance measuring device with an electromechanical design.
The device is particularly suitable for manual use with clamps or test guns, or for use in an automated system
Main features
- Insulation test at 500VDC, fixed voltage (other values available upon request)
- Digital display of high voltage measurement on touchscreen panel
- Digital display of insulation resistance measurement on touchscreen panel
- Programming and messaging display on touchscreen panel
- Programmable fault threshold (1 to 50 MOhms, other values available upon request)
- In case of fault : audible and visual alarm
- Automatic discharge at the end of tests
- Test recording
Technical specifications
| Power Supply | 230 V / 50 Hz + ground |
| Presentation | standard 19″ case |
| High-voltage AC test
Voltage setting and measurement
Insulation resistance measurement Fault threshold Test duration Ground reference Discharge Test start mode Results recording |
Fixed voltage 500VDC Digital display with accuracy as a percentage of the value (2.5 to 3.5%) or a percentage of the range (1.5 to 2.5%) Digital display with accuracy as a percentage of the value (2.5 to 3.5%) or a percentage of the range (1.5 to 2.5%) 1 to 500MOhms by programming Programmable Yes Automatic at the end of the internal resistance test Cycle start button or hold button on remote control input depending on version Results with traceability elements (USB or Ethernet transfer) |
Items supplied with the device :
- Instructions for use
- Verification report with COFRAC-certified connection proof
Accessoires d’utilisation disponibles :
- Test cables
- Ground continuity tester
- Fault simulation box
- Test cages
- …