General Description
The GLP1 and GLP2 types are programmable, electronically designed multi-test devices.
The leakage current under High Voltage can reach up to 100mA, which requires the use of a special safety device (EN 50191 standard).
They allow for the sequencing of various safety tests required by different standards (Mass Continuity, Insulation, High Voltage in AC or DC) as well as functional tests (single-phase product powered at its nominal voltage by an external source).
All tests are automatically performed sequentially with a single product connection.
Main Features
- Continuity Test of Live Parts at 24VDC for detecting phase/neutral connections or short circuits
- Continuity Test of Ground at 6V or 12VAC – Current from 10A to 30A – Programmable resistance threshold – 4-wires method
- High Voltage Test at 5.5KVAC max and 6KVDC – Leakage current up to 100mA AC and 50mA DC
- Insulation Test with maximum voltage 6KVDC and maximum resistance 10GΩ
- Simulation Test of Standard Leakage (without isolation transformer and with summation of phase and neutral leakage)
- Functional Test with external voltage source for current consumption measurement
- Digital display of measurements on control panel
- Programming and messaging display on control panel with keypad
- All programmable parameters (voltage, duration, minimum threshold, maximum threshold, ramp-up/ramp-down, etc.)
- In the event of a fault : disconnection, audible and visual alarm
- Test recording
- Numerous interfaces : USB, RS232, Ethernet, Digital I/O…
- PC control possible
- Essai isolement avec tension max 6KVDC et résistance max 10GΩ
- Essai de simulation des fuites normatives (sans transfo d’isolement et avec cumul des fuites phase et neutre)
- Essai fonctionnel avec source de tension externe pour mesure de courant consommé
- Affichage numérique des mesures sur pupitre
- Programmation et affichage messagerie sur pupitre avec clavier
- Ensemble des paramètres programmables (tension, durée, seuil mini, seuil maxi, rampe de montée/descente…)
- En cas de défaut : signal sonore et lumineux
- Enregistrement des essais
- Nombreuses interfaces : USB, RS232, Ethernet, Entrées/Sorties numériques…
- Pilotage possible par PC
- Only one presentation option in a 19″ box for integration
- 1 type of control panel : touchscreen panel
Technical specifications
| Power Supply | 230 V / 50 Hz + ground |
| Presentation | standard 19″ case |
| Ground Continuity Test
Open-Load Voltage Setting Test Current Setting Resistance Measurement Test duration
Continuity Test of Live Parts Voltage Setting Current Measurement Fault Threshold Test duration
AC/DC High Voltage Test Voltage Setting and Measurement Leakage Current Measurement Trip Threshold Test duration
Insulation Test Voltage Setting and Measurement
Insulation Resistance Measurement Fault Threshold Test duration
Essai Fuites normatives (simulation) Réglage et mesure de Tension
Mesure de courant de fuite Seuil défaut Durée d’essai
Essai de fonctionnement Réglage et mesure de Tension
Mesure de courant consommé Seuil défaut Durée d’essai Autres mesures |
6VAC or 12VAC 10A to 30A Digital display 0 to 400mΩ or 0 to 1100mΩ depending on the version Configurable
Fixed to 24VDC Digital display 0 to 600mA Configurable minimum and maximum values Fixed < 1s
Adjustable up to 5.5KVAC and 6KVDC Digital Display: 0 to 100mAAC and 0 to 50mADC Programmable minimum and maximum thresholds Programmable
Adjustable up to 6KVDC Digital display Digital display : 250kΩ to 10GΩ Programmable Programmable
Adjustable from 10VAC to 270AC Digital display Digital display : 0 to 10mA Programmable Programmable
External source or (internal limited to 1A or 2A depending on version) With or without voltage measurement – Digital display Digital Display : 0 to 16A – Automatic range change depending on version Programmable Programmable Optional features include power, cosPhi, resistance measurements… |
| Operation
Ground reference Test Launch Mode Results Recording |
Floating potential Sustained pressure on a two-handed control With |
Items supplied with the unit :
- Instruction manual
- Verification report with COFRAC-certified connection proof
Available accessories :
- Ground continuity probe
- Control box (two-hand) and connection box
- Fault simulation box
- Test cages
- DLL library and PC control software
- …