General Description
The A1290 type unit is a simple electromechanical high-voltage generator.
The unit is particularly well-suited for use with a test cage.
Control posts
Select the station based on the type of tests you want to perform:
Mass Continuity
High voltage
Isolation
Leakage current
Chained multitests
SCHLEICH GLP1 and GLP2 Programmable Automatic Ground Continuity Station
General Description
The GLP1 and GLP2 type stations are programmable, electronically designed, automatic ground continuity testers.
They are particularly suitable for manual use with a clamp or test gun.
Read more SCHLEICH GLP1 and GLP2 Programmable Automatic Ground Continuity Station
MULTITEST stations SCHLEICH GLP1 and GLP2 range
General Description
The GLP1 and GLP2 types are programmable, electronically designed multi-test devices.
With their high-voltage leakage current limited to 4mA, they can be used without special safety devices (EN 50191 standard).
They allow for the sequencing of various safety tests required by different standards (Mass Continuity, Insulation, High Voltage in AC or DC) as well as functional tests (single-phase product powered at its nominal voltage by an external source).
All tests are automatically performed sequentially with a single product connection.
Programmable automatic high-voltage station ≤ 10KV type A1410
General Description
The A1410 type unit is a programmable, automatic, electromechanical high-voltage generator.
The device is particularly suitable for manual use with clamps or test guns, or for use in an automated system.
.
Read more Programmable automatic high-voltage station ≤ 10KV type A1410
Programmable automatic multi-test stations with PC control
General Description
Type D1071, D1091, and D1127 workstations are electromechanically designed units comprising a Programmable Logic Controller (PLC) and controlled by a PC equipped with our supervisory software developed using PCVue..
They allow for the execution of various safety tests required by different standards (ground continuity, insulation, high voltage in AC or DC, standard leakage) as well as functional tests (single-phase or three-phase power supply).
All tests are automatically performed with a single product connection.
Read more Programmable automatic multi-test stations with PC control
Simple High Voltage station ≤ 10KV type A884-A1296
General Description
The A884-A1296 type unit is a simple electromechanical high-voltage generator.
The device is particularly suitable for manual use with clamps or test guns, or for use in an automated system.
Read more Simple High Voltage station ≤ 10KV type A884-A1296
Programmable automatic isolation station type A1410IS
General Description
The A1410IS is a programmable, automatic insulation resistance measuring device with an electromechanical design.
The device is particularly suitable for manual use with clamps or test guns, or for use in an automated system
Read more Programmable automatic isolation station type A1410IS
Programmable automatic ground continuity station type B498A
General Description
The B498A is a programmable, electromechanical, automatic ground continuity tester.
The device is particularly suitable for manual use with clamps or a test gun, or for use in an automated system.
Read more Programmable automatic ground continuity station type B498A
Programmable automatic multi-test stations with touchscreen control panel
General Description
Type D1010, D11122, and D1125 workstations are electromechanically designed workstations incorporating a Programmable Logic Controller (PLC) and controlled by a color touchscreen interface.
They allow for the sequencing of various safety tests required by different standards (ground continuity, insulation, high voltage in AC or DC) as well as functional tests (single-phase or three-phase power supply).
All tests are automatically performed with a single product connection.
Read more Programmable automatic multi-test stations with touchscreen control panel
Simple automatic multitest station
General description
The D1131 unit is an electromechanical unit comprising a Programmable Logic Controller and controlled by a colour touchscreen panel.
This station allows for the execution of various safety tests required by different standards (Continuity Grounding, Insulation, or High Voltage AC) as well as a functional test (single-phase power supply without current measurement).
All tests are performed automatically with a single product connection.