General Description

The GLP1 and GLP2 types are programmable, electronically designed multi-test devices.

The leakage current under High Voltage can reach up to 100mA, which requires the use of a special safety device (EN 50191 standard).

They allow for the sequencing of various safety tests required by different standards (Mass Continuity, Insulation, High Voltage in AC or DC) as well as functional tests (single-phase product powered at its nominal voltage by an external source).

All tests are automatically performed sequentially with a single product connection.

General Description

The GLP1 and GLP2 types are programmable, electronically designed multi-test devices.

With their high-voltage leakage current limited to 4mA, they can be used without special safety devices (EN 50191 standard).

They allow for the sequencing of various safety tests required by different standards (Mass Continuity, Insulation, High Voltage in AC or DC) as well as functional tests (single-phase product powered at its nominal voltage by an external source).

All tests are automatically performed sequentially with a single product connection.

General Description

Type D1071, D1091, and D1127 workstations are electromechanically designed units comprising a Programmable Logic Controller (PLC) and controlled by a PC equipped with our supervisory software developed using PCVue..

They allow for the execution of various safety tests required by different standards (ground continuity, insulation, high voltage in AC or DC, standard leakage) as well as functional tests (single-phase or three-phase power supply).

All tests are automatically performed with a single product connection.

General Description

Type D1010, D11122, and D1125 workstations are electromechanically designed workstations incorporating a Programmable Logic Controller (PLC) and controlled by a color touchscreen interface.

They allow for the sequencing of various safety tests required by different standards (ground continuity, insulation, high voltage in AC or DC) as well as functional tests (single-phase or three-phase power supply).

All tests are automatically performed with a single product connection.

General description

The D1131 unit is an electromechanical unit comprising a Programmable Logic Controller and controlled by a colour touchscreen panel.

This station allows for the execution of various safety tests required by different standards (Continuity Grounding, Insulation, or High Voltage AC) as well as a functional test (single-phase power supply without current measurement).

All tests are performed automatically with a single product connection.